RESISTA-Label N
Special process ink series for printing on polyolefin films
Application
The RESISTA-Label N series is designed for offset printing on synthetics or poor absorbent substrates, like cast coated or metallised paper and board.
Due to their fast drying characteristics, these non-stay-open inks are supporting fast post print finishing at high mechanical resistance.
Your Benefits
This ink also speeds up the production process, when a rush job on poor-absorbent substrate is coming in. On films it is the choice for conventional offset printing inks.
Special Properties
- Especially intense oxidative drying
- Free from mineral oils
- Outstanding mechanical resistance
- Good gloss
- Good stacking characteristics
Special Information
Drying on non-absorbent substrates usually takes very long even if special inks are used. Please note, that drying on films will still take 24-72 hours, dependent on the amount of oxygen available for the ink. Small stacks and decollating the sheets by hand every hour can reduce the drying time to a minimum.
Fastness Properties
| Light | Alcohol | Solvent | Alkali | |
|---|---|---|---|---|
| Yellow | 5 | + | + | + |
| Magenta | 5 | + | + | - |
| Cyan | 8 | + | + | + |
| Black | 8 | + | + | + |
